New Items

Product Details:

Self Adhesive Aluminium Flashing Tapes
Application - Leaks and cracks on galvanised / asbestos sheets, concrete roofs, boats frames and skylights, glass and plastic surface.

Ready to use.
Cold applied.
Simple & quick application.
Saves time and cost.

Product Details:

Cold Applied Clay Type Emulsion for Insulation Protection
TIKI KOTE T-1 & T-2 is water bound clay type emulsion processed from suitable grade of bitumen and inert fillers for insulation protection supplied in smooth paste consistency.
USES It is used to render adequate protection to insulation against moisture and accidental damage thereby preventing heat losses and increasing insulation efficiency. It is used to maintain insulation dry owing to its unique vapour barrier property. It is used on heated lines, vessels and equipment in intermittent or dual temperature service to prevent dampness in the insulation during off periods or cold cycles.
ADVANTAGES It protects insulation from chemical attacks of mild acids & mild alkalis. It provides seamless protective barrier and forms tough film that protects insulation from ravages of weather protecting it from moisture, water, chemical spillages, etc. Unique plastomeric property accommodates movement stresses and enhances resistance to vibrations, accidental shocks and thermal cycles. In the wet state, it is non- flammable and inert for worker safety. Its thixotropic consistency yields smooth finish on rough substrates Being water based, it contains no harmful solvents that will attack insulations or facings.

Additional Information:

• Delivery Time: 1-2 days
• Packaging Details: 20 kg Drum

Product Details:

Liquid MembranesThis waterproofing method involves the use of a monolithic, fully bonded coating which forms an elastomeric waterproof membrane. There are three types of coatings namely PU based coating, acrylic elastomeric coatings and two component acrylic modified cementitious coating. PU based coatings are known to provide long lasting solutions. The coatings are applied by hand or spray. Acrylic elastomeric coatings offer protection for concrete from water infiltration as well as atmospheric gases. Two component acrylic modified cementitious coatings on the other hand can be applied with a brush, roller or trowel to prevent unwanted water penetration in concrete surfaces.

Product Details:

Fiberglass mesh is used to strengthen the surface of the plaster layer all kinds of buildings. This mesh reinforced liquid waterproofing layers slabs and roofs. Fiberglass mesh used to impart mechanical strength filler floor coverings that are different self-leveling properties.
Fiberglass mesh is a weaved material of glass yarn, firstly loom state mesh is weaved, then it is impregnated with a coating that ads and hardens structure and adds properties to the material.

Product Details:

DESCRIPTIONTIKI PRIME S is a Ready to use Single Component Quick Drying LowViscosity Primer in Liquid Form. It is prepared using Special GradeBitumen under Controlled Condition in Refined Solvent.USESIt is used as Primer on Concrete, Masonry, Metal, Asbestos Sheet, Wood and Stone Surfaces for Sealing Substrate Pores and Promote Adhesion of Bitumen Based Waterproofing Systems, whether Liquid, Felts or Membranes with the Substrate.ADVANTAGESHigh Penetrating Power Provides Excellent Adhesion to the SubstrateLow Viscosity – Ease of Application Good Resistance to Mild Acids/Bases, Salt Solution High Resistance to Freeze Thaw CyclesNo Heating Required – User FriendlyForms Water Impermeable Film Improves Adhesion of Bituminous Waterproofing Systems with Substrate Binds left over Dust Particles during Substrate Preparation Increasing Bond Quick Drying and Bond Development compared to Water Based Primer

Additional Information:

• Delivery Time: 1-2 Days
• Packaging Details: 20 L

Product Details:

TIKI BOND Cold Applied Bituminous Adhesive
TIKI BOND is a premium, waterproof adhesive of heavy brushingconsistency made from selected modified Bitumen, formulated for bonding layers of Bitumen coated base sheets and plies in built-up and modified roofing systems.
 It is used as an adhesive for bonding APP/SBS modified bitumen basesheets and cap sheets to approved substrates such as structuralconcrete roof decks, existing smooth surface of Bitumen built-uproofs, certain roof insulations, glass and fiber base sheet. It is used in lieu of hot mop Bitumen in built-up roofing applications. It is used as a lap cement, adhesive for use with rolled roofingmembranes, and blind-nailing overlap applications. It is also used for bonding gravel or granule surfacing for built-uproofing systems.
 Eliminates the need for kettles and torches Eliminates the possibility of damaging Bitumen from overheating. Excellent adhesive strength on to the Bitumen and bituminous surface Minimizes the risk of wrinkles, blisters and other problems Safe to use - Eliminates potential burn and fire hazards of hotBitumen Stronger bond - Greater cohesive strength for a reliable roof
TIKI BOND is supplied in standard pack size of 20 Kg. drum.

Additional Information:

• Packaging Details: 20Kg

Product Details:

DESCRIPTIONTIKI PLAST is single component ready to use cold applied tough and durable bituminous compound based on modified bitumen and selected reinforcing materials, for caulking and flashing applications supplied as black / dark brownish paste.It is not affected by atmospheric temperature variation and resists any tendency to flow out of the joint under hot weather conditions or resist loss of resiliency during cold conditions.USESIt is used for stopping leaks through cracks of concrete roofs, walls, porous masonry, and through gaps around J-Bolts of reinforced cement sheets, G.1 corrugated sheets.It is used as sealants for sealing metal fabrications, plate joints of wagons, coach, and buses in Railway, Bus, and Automotive industry.It is used as caulking agent for filling crevices and vertical joints between steel plates, folded section, wood joints, precast concrete claddings, and blocks, underground tanks etc.It is used as flashing compound to flash projections and terminations preventing entrance of water or moisture.It is also used as adhesive for bonding rain guards over rubber trees.It is also used as bedding compound to absorb shock and vibration.
ADVANTAGES Forms firm dustproof and watertight seal Excellent slump resistance Good resistance to water, mild acids, and alkalis Good adhesion with all material of construction Good tooling property High resistance to moisture penetration through joints Can withstand temperature up to 800C Excellent performance under atmospheric thermal cycles Compatible with bituminous, concrete, masonry, wood, metal, and all material of construction

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 20 Kg

Product Details:

We are providing Floor Coatings. Shibam has been involved in the business since 1990.